CONTACT: KEITH.GAINEY@PROLINEPERFORMANCELLC.COM
About Us
STANDARD & CUSTOM ROLL WIDTHS
QUICK DELIVERY COMPETITIVE PRICE
QUICK DELIVERY COMPETITIVE PRICE
Green Belting & DeWal Thermal Spray Masking Tapes & Compounds Shipped From Stock!
QUICK DELIVERY COMPETITIVE PRICE
QUICK DELIVERY COMPETITIVE PRICE
QUICK DELIVERY COMPETITIVE PRICE
WE SHIP ORDERS FROM STOCK! ELIMINATE LONG LEAD TIMES!
THERMALSPRAYMASKING.COM
PROLINE PERFORMANCE 1500 W. HAMPDEN AVE STE 3A/3B SHERIDAN, CO 80110
Phone: 817-999-6089
Green Belting THERMAL SPRAY MASKING Tapes
Common masking applications:
Plasma Spray
Extremely high temperature and high abrasion call for masking materials that must withstand these forces during expected ‘dwell time’ parameters. Masking materials, including tapes and compounds must remain in place, resist burning and edge lifting, and prevent unwanted overspray and/or damage to the part being sprayed. All Green Belting Industries Plasma Masking Materials are precision made with the highest quality Silicone, Fiberglass, Adhesives and Compounds to ensure optimum performance in this harsh setting. All are easy to work with, offer high flexibility and conformability, and can be removed cleanly and easily following the spray process, leaving leave no adhesive residue.
Recommended materials: 170-10S YL & 20S YL, 170-10S Green, 170-10S Red, 179-20S or 25S , SW-35 Fabric, and HVMC.
Gas Fueled-HVOF
The high particle velocity of GF-HVOF results in extremely high abrasion and a rapid transfer of heat through the masking materials. In order to mask effectively against GF-HVOF, masking materials, including tapes, must be strong enough to withstand both the high abrasiveness and high heat. Green Belting™ HVOF Tapes and HVMC (High Velocity Masking Compound) are proven performers that hold up exceptionally well against the HVOF spray while offering high conformability, and clean, residue-free removal.
Recommended materials: HVMT Orange Tape, and HVMC.
Liquid Fueled HVOF
The extreme abrasion and heat generated by LF-HVOF coatings often limit masking options to metal masking fixtures or tooling. However, effective masking strategies can include combinations of metallic masking for highest exposure areas, and tapes, fabrics, and compounds as secondary and supplementary masking. Used in this way, Green Belting™ Tapes and HVMC Compound can help to reduce or eliminate bridging and edge chipping, and provide effective coverage in secondary masking areas.
Recommended materials: HVMT Orange Tape and HVMC Compound as secondary masking for precision masking for challenging applications, in conjunction with metal masking profiles.
Arc Spray
The primary challenge associated with the Arc Spray coating process is the wide spray plume that exits the gun. This results in the necessity of primary masking, close to the target zone, and secondary masking to protect large non-target areas from overspray and costly clean-up or re-work. While arc spray is not as abrasive as other spray processes, it still requires proper masking to ensure protection of the part and non-target surfaces.
Recommended materials: 170-10S YL & 20S YL, 170-10S Green, 179-20S or 25S, SW-35 Fabric, and HVMC.
Flame Spray
Flame Spray coatings, (combustion coatings) are a very basic form of thermal spray coating. Because of the relatively low heat and abrasion, coatings are often applied with hand-held spray guns in an open shop setting rather than within a spray booth. Many Green Belting Industries masking materials are well-suited from this process. Masking strategies should contemplate materials that are capable of withstanding both the grit blast and flame spray coating process in order to save time and reduce cost.
Recommended materials: 170-10S YL & 20S YL, 170-10S Green, 170-10S Red, 179-20S or 25S , SW-35 Fabric, and HVMC.
Grit Blast
To effectively prepare the component for the thermal spray coating, sharp, angular media, such as aluminum oxide, is blasted at high pressure towards a target surface to remove unwanted coatings and to apply a desired (roughened) surface texture. Green Belting Industries masking materials, such as 170-10S Green are well suited to endure both the grit blast and spray coating processes, thus saving significant time and cost.
Depending on the size of grit and coating method being used,
Recommended materials include: HVMT Orange, 170-10S YL & 20S YL, 170-10S Green, 170-10S Red, 179-20S or 25S, SW-35 Fabric, and HVMC.
dewal thermal spray masking tapes
Additional Information
DeWAL Industries manufactures the industry’s most complete line of thermal spray tapes for a multitude of applications. With years of experience developing uniform, efficient plasma tapes, DeWAL is qualified by a long list of aircraft engine, auto- motive, medical and mission-critical manufacturers. These include GE, Pratt & Whitney, Rolls Royce, GM, Stryker, Lockheed Martin and Northrup Grumman.
DeWAL tapes are free of carbonizing materials and form a protective mask for metal or ceramic plasma spraying, arc spraying, HVOF and grit blasting. No matter what the angle of spray, the metal being sprayed, the temperature or the substrate, DeWAL manufactures a tape that will withstand the bombardment, protecting pieces from overspray and splash.
DeWAL tapes are engineered to adhere aggressively, ensuring sharp edges, and remove quickly and cleanly.
DeWAL films and tapes are produced from PTFE, UHMW-PE, FEP, polyimide, glass fiber, silicone rubber, aluminum foil, copper and poly- ester film substrates with proprietary silicone, acrylic or rubber-based temperature-resistant and chemical-resistant adhesive systems.
DeWAL is ISO 9001:2008 registered and meets standards set by numerous industry groups.
